SD-20

From TekWiki
Jump to: navigation, search
Tektronix SD-20
10 GHz Loopthrough Sampling Head
Tektronix SD-20 Sampling Head

Compatible with 11800-series scopes

Produced from 1989 to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix SD20 Loopthrough Sampling Head is a single-channel, 20 GHz loop-through sampling head designed for low-loss testing in applications such as microwave systems research and development, digital device characterization and high-speed digital communications circuit design.

The SD20 is nonterminated and keeps losses to a minimum by routing the signal of interest directly through the sampling head without the need of a power divider. The SD20 can also be used for customized TDR measurements of transmission lines and controlled impedance devices. An external signal generator may be used, instead of the SD-24 step generator, to tailor the TDR stimulus to fit a particular situation. For instance, slower slew rates or higher amplitude may be utilized, or you may perform half-sine or impulse testing. In digital communications, the SD20 is useful for viewing and triggering on the clock signal without the use of a power divider.

Specifications

Rise time 17.5 ps
Bandwidth 20 GHz typ.
Noise typically 750 µVRMS, 1.2 m VRMS max. (350 µV typ./550 µV max. with smoothing)
Max. input 1.0 Vp-p signal, 1.6 Vp-p (AC+Offset) operating, ±3 V non-destructive
Sampling rate 100 Hz - 200 kHz
Signal connections 50 Ω SMA connectors

Pictures

Personal tools
Namespaces

Variants
Actions
Navigation
Tools