Specified accuracy is for connections through 8/125 micron single-mode fibre, although a lens in front of the photodiode allows connections using multi-mode fibre as well, at some degradation of response speed.
|Pulse response||55 ps|
|Bandwidth||6.4 GHz (equiv.)|
|Spectral response||1000 nm – 1700 nm|
|Deflection||50 μW/Div to 50 mW/Div @ 1300 nm|
|Noise equivalent power||42 μWRMS max.|
|Max. nondestructive input||10 mW mean, 125 mW peak|
The S-42 borrows heavily from the S-4 sampling head, re-using the S-4 strobe, sampler and preamp boards. It uses the same six-diode traveling-wave sampling gate, strobed by 125 ps pulses generated using a snap-off diode driven by an avalanche transistor.
The S-4's SMA input connector is still present internally, and driven electrically in some of the calibration procedures, with the photodiode removed.
To accommodate the photo diode, the S-42's case is longer than the S-4's. When inserted, the S-42 therefore protrudes from the base unit by about two centimeters.
Description in 1989 Catalog