533

From TekWiki
Jump to: navigation, search
Manuals – Specifications – Links – Pictures

The Tektronix Type 533 is a 15 MHz oscilloscope introduced in 1958 that uses letter-series and 1-series plug-ins.

It is similar to a 535, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from ×2 to ×100.

There is also a rack-mount version, the RM33. Later 533A have BNC connectors. The standard CRT for the 533 and 533A is the T5330-2. Difference between 533 and 533A is only trigger mode.

Specifications

Bandwidth DC to 15MHz (≤ 3 dB) with Type K plug-in
Rise time 0.024 μs
Line Voltage 108/115/122/216/230/244 VAC ±10%,selected via soldering wire on transformer, 50 Hz to 60 Hz.
Thermal Protection Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level
Power Consumption 500W with CA plug-in
Cooling AC Fan
Trigger Modes (533) AC/DC/AC Slow, and HF Sync
Trigger Modes (533A) AC/DC/AC LF Reject, and HF Sync
Anode Potential 10 kV
Screen Area 6 cm × 10 cm
Construction Aluminum alloy chassis. Anodized front panel
Weight 61,5 lbs / 27,8 kg


Internals

The vertical amplifier consists of a 12BY7 differential amplifier followed by a 6DJ8 cathode-follower, followed by a 6197 differential (common-cathode) output stage that drives the 200 ns L-C delay line, which drives the vertical deflection plates of the CRT.

Trigger pickoff is taken after the cathode follower stage in the vertical amplifier. There is a 6DJ8 differential trigger pickoff amplifier followed by half of a 6DJ8 a cathode follower, buffering the trigger signal.

The trigger circuit is a 6DJ8 trigger amplifier followed by a 6DJ8 Schmitt trigger. Triggering can be from the internal pickoff or from an external signal or "line" trigger, from a 6.3 V tap on the power transformer.

The 533 contains a 53 °C (128 °F) thermal cutoff. The high voltages for the CRT, +8,650 V and −1,350 V, are generated by a 60 kHz Hartley power oscillator and five 5642 high-voltage rectifier diode tubes.

Pictures