The Tektronix 317, introduced in 1959, is similar to the 316, but with higher acceleration voltage (9 kV versus 1.8 kV) on the CRT. It was intended for use where a bright display is needed. The 317 initially used UHF connectors for the signal input and calibrator output; later units use BNC connectors.
There is also a rackmount version, the RM17.
Type 317 Mod 101 operates on 50 to 400 Hz power and uses a DC fan motor.
The 317 uses the T317 CRT (154-0346-00).
- one vertical channel
- calibrated vertical deflection factors from 0.1 V/div to 50 V/div
- DC to 10 MHz frequency response, 35 ns risetime)
- 0.01 V/div in AC-coupled mode
- 38 pF input capacitance
- horizontal sweep rates from 2 sec/div to 0.2 μs/div