If you get the "Sorry, the file cannot be displayed. There seems to be a technical issue ..." error when trying to view an image, please make sure you access the site at http://w140.com/tekwiki/, not www.w140.com/tekwiki/ (with "www"). Sorry for the inconvenience - we are looking for a generic solution.

Difference between revisions of "PG506"

From TekWiki
Jump to: navigation, search
m
 
Line 3: Line 3:
 
* [[Media:070-1740-01.pdf|Tektronix PG506 Manual for sn 39999 and below (OCR, PDF)]]
 
* [[Media:070-1740-01.pdf|Tektronix PG506 Manual for sn 39999 and below (OCR, PDF)]]
 
* [http://w140.com/smb/PG506_SM.pdf Tektronix PG506 Manual for sn 40000 and above (OCR, PDF)]
 
* [http://w140.com/smb/PG506_SM.pdf Tektronix PG506 Manual for sn 40000 and above (OCR, PDF)]
}} In functionally replaces the [[067-0502-01]] in the "standard amplitude" mode, and the [[106]] in the "fast rise" and "high amplitude" modes.  
+
}} It functionally replaces the [[067-0502-01]] in the "standard amplitude" mode, and the [[106]] in the "fast rise" and "high amplitude" modes.  
  
 
There are (at least) two versions of the PG506. The older version has two relays that switch a low-pass (noise) filter into the 10 V and below ranges. The new version just has a capacitor across the output for these ranges.
 
There are (at least) two versions of the PG506. The older version has two relays that switch a low-pass (noise) filter into the 10 V and below ranges. The new version just has a capacitor across the output for these ranges.

Latest revision as of 03:59, 8 October 2019

Tektronix PG506
1 MHz calibration generator
Tektronix PG506

Compatible with TM500 system

Produced from 1974 to 1993

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix PG506 is a 1 MHz calibration generator plug-in for the TM500 system. It functionally replaces the 067-0502-01 in the "standard amplitude" mode, and the 106 in the "fast rise" and "high amplitude" modes.

There are (at least) two versions of the PG506. The older version has two relays that switch a low-pass (noise) filter into the 10 V and below ranges. The new version just has a capacitor across the output for these ranges.

Common failure modes: In case of low or no output on the 20 V and above ranges, check Q270, Q280 and Q290.

Pictures

PG506 older version

PG506 newer version

PG506A