If you get the "Sorry, the file cannot be displayed. There seems to be a technical issue ..." error when trying to view an image, a workaround is to click on the cog icon in the upper right side of the media viewer, and then select "Disable Media Viewer". We are aware of the problem and are looking for a solution.

P410

From TekWiki
Revision as of 03:27, 6 August 2017 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
P400 series catalog excerpt from 1957

The Tektronix P410 is a 10× passive voltage probe. Maximum voltage is 600 V peak-to-peak. It connects to the scope with a UHF connector.

The "P400 Series" (not to be confused with the modern P400 probe) also includes P405 (5x), P420 (20x), P450 (50x), P450-L (50x extra low capacitance), and P4100 (100x).

These probes were introduced in 1955 along with the Type 541 and Type 545 scopes because at 30 MHz, the P510A's 50 Ω coax cable exhibited unacceptable ringing due to the impedance mismatch at the scope's 1 MΩ input. It uses a special cable with a very thin, high-resistance center conductor which creates a better impedance match. All subsequent high-impedance probes use this kind of cable.

Links