Unlike the 1S1, it contains pulsers that allows it to perform time-domain reflectometry (TDR) measurements. The 1S2 has two 50 Ω pulsers, one of which is active at a time. One puts out a 250 mV pulse with 50 ps rise time. The other puts out a slower 1 V pulse. The sampling bridge is a feed-through type.
For TDR measurements, the signal from one of the internal pulsers is fed through the sampler, and out to the the transmission line being tested. Returning pulses are detected as they pass back through the sampler, and they are reabsorbed by the 50 Ω impedance of the pulser.
Waveform output can be to the CRT of the mainframe and/or to a plotter or low-speed data acquisition device via banana connectors on the front of the 1S2.
The 1S2 was introduced in 1967 and was sold through 1972.
- Tektronix 062-1244-00: Time-Domain Reflectometry Measurement Concepts, James A. Strickland, 1969. pages. PDF, OCR, 6.2 MB
- Service Scope No. 45, August 1967 - Time-Domain Reflectometry Theory
- Service Scope No. 38, June 1966 - Tektronix Type 1S2 Makes Reflectometry Easy
- 50 Years of RF and Microwave Sampling, Mark Kahrs
- Picosecond Pulse Labs Application Note 4: TDR